Bitspower Titan One 2.0

[BenWayland]

Another package that was sent to me from Bitspower is the Titan One 2.0. This kit is designed for the people wanting to build a PC with a custom loop who don't want to purchase the tools to have one or who don’t feel comfortable bending tubing.

Let's go over what you will find in the box of this kit.
- Lian Li O11-D (White or Black) non EVO
- Bitspower DDC Distribution Plate w/ Adjustable CPU Block (Pre-Installed)
- Bitspower Summit MS CPU Water Block
- Bitspower Tarasque II 360mm Radiator (Pre-Installed)
- 3x Bitspower Notos 120mm RGB Fan (Pre-Installed)
- Bitspower Stop Fitting (Pre-Installed)
- Bitspower Drain Fitting (Pre-Installed)
- 2x Bitspower 90° Fitting (Pre-Installed)
- 6x Bitspower Dual O-Ring Fitting (4x Pre-Installed)
- 2x Bitspower Extension Fitting
- 2x Bitspower Hard Tubing (Pre-Installed)
- 2x Bitspower 90° Pre-Bent Hard Tubing
- Bitspower Soft Filling/Drain Tube
- Bitspower CPU Hardware for Intel 1700, Intel 1200, and AM4
- 3-1 PWM Fan Splitter
- 2-1 DRGB Cable

This list of components does not stop there though as depending on which supplier you buy from, you get the option of paying for an additional kit. This additional kit will include:
- Bitspower 500ML Squeeze Bottle
- Bitspower 24 pin Bypass Connector
- Bitspower Digital Leak Detector
- 2x Bitspower 500ML Pellucid Coolant

The base 2.0 kit comes in at $619 USD with the 2.0 combo kit coming in at $680 USD. All you do with this kit is fill it with your components! This kit only comes with 3 fans, so you will need to either purchase additional fans for the case or replace them with the fans of your choosing. Bitspower was kind enough to send me 4 additional fans that match the ones in this kit.

The distro plate that comes pre-installed on the case comes with an adjustable block for your CPU. Because motherboard manufacturers have different height CPU sockets, this allows you to adjust it so the tubes are completely straight. The distro plate does also come with a block off plate covering the holes for a GPU loop so that way you can add that at a later date if you so wish.

Specs of my Titan One 2.0 Build:
- Motherboard: ASUS ROG MAXIMUS Z690 Hero
- CPU: Intel Core i7 12700K
- SSD: Samsung 980 Pro 1TB
- RAM: G.Skill Trident Z5 32GB (2 x 16GB) 5600 CL36
- GPU: ASUS ROG STRIX RTX 3080 10GB
- PSU: ASUS ROG STRIX 1000G
- Case: Lian Li O11-D (White) (Bitspower Titan One 2.0)
- Case Fans: Bitspower Notos 120mm RGB x4
- Coolant: EK-Cryofuel Premix 1000ML - Solid Cloud White (On Order)